× Siemens Simcenter FloTHERM 2019.1 Suite Close
Siemens Simcenter FloTHERM 2019.1 Suite | 1.8 Gb
The Mentor, a Siemens business, is pleased to announce the availability of Simcenter Flotherm 2019.1. This suite creates a thermal digital twin of an electronics product that is capable of simulating temperature and airflow.
Simcenter Flotherm Release Highlights - Date: June 2019 Reduced Order Model Creation
BCI-ROM Export;
For linear, conduction only models, a Boundary Condition Independent Reduced Order Model (BCI-ROM) can be created to a user requested level of relative error, ε. The BCI-ROM is extracted using the FANTASTIC method. The BCI-ROM is created in the form of a zip file containing matrices compatible with analysis in Matlab, Octave, and similar tools.
Thermal netlist file export;
For linear, conduction only models, a thermal netlist file (also known as a thermal spice file) can be can be created to a user requested level of relative error, ε. The thermal netlist is extracted using the FANTASTIC method. This will export a .sp file compatible with electrothermal analysis in Mentor Eldo.
Power Control
Control Attribute; Contains thermal definitions of operating frequencies
- Frequency
- Power vs Temperature data
- Minimum Temperature
- Maximum Temperature
Frequency - Power vs Temerature; Power vs Temerature data is entered for individual frequencies.
Control Summary; The 'Control Summary' command is used to visualize all defined power vs temerature curves on the same chart.
Controller Object; A controller object contains:
- One Heat Source (Controlled Power)
- One Monitor Point (Temerature Sensor)
Controller Behavior; Transient Models: the operation frequency of the controller will automatically change during the trancient solution. Steady State Models: the frequency does not change.
Results Output; Monitor Points within Controller objects have power, frequency, and temperature history available in the Tables window.
General
Export to previous version; Export models and assemblies as Simcentor Flotherm v12.2 PDML
Z-Rotation support for CSV layout; Z-rotation for components is now supported for Import and Export of CS layout files in FloEDA Bridge
ECXML import/export; ECXML import/export is now installed by default and no license is required.
KOA Resitor Library; a library of KOA resistors is now installed by default into the Simcenter Flotherm library.
NMB Fan Library Update; the NMB library of fans has been pdated
Package Outline control ODB++; the ODB++ component outline type to be used during import can be controlled with Preferences in FloEDA Bridge
FloSCRIPT relative path support;FloSCRIPT now support the use of relative paths for all file export commands.
The powerful FloTHERM suite of 3D computational fluid dynamics (CFD) software predicts airflow and heat transfer, in and around electronic equipment. FloTHERM delivers right-by-design products that save design time and reduce the need for physical prototyping from components and boards to complete systems and data centers.
FloTHERM uses advanced CFD techniques to predict airflow, temperature, and heat transfer in components, boards, and complete systems, including racks and data centers. It's also the industry's best solution for integration with MCAD and EDA software. FloTHERM is the undisputed world leader for electronics thermal analysis, with a 98 percent user recommendation rating. It supports more users, application examples, libraries and published technical papers than any competing product.
FloTHERM PCB is a unique, radical software program for streamlining concept development of printed-circuit boards (PCBs), while ensuring good thermal design and accelerating the PCB design process. FloTHERM PCB facilitates collaboration between product marketing, electronic engineers and mechanical engineers on PCB design, particularly during the conceptual phase of the design process.
Learn how Simcenter Flotherm 2019.1 addresses the challenge of limited time typically available during electronics development. Normally there is not the time for extensive transient thermal simulations to fully evaluate a design in different operating scenarios. However, the introduction of accurate, boundary condition independent, reduced order models (BCI-ROMs) enable speeds up to 40,000 times faster than the equivalent full 3D CFD models. Additionally, find out how to model frequency based power control in thermal simulation studies for power electronics and mobile device applications and how electro-thermal modeling accuracy in separate circuit analysis software is improved by thermal netlist extraction capabilities within Simcenter Flotherm.
Faster transient electronics thermal simulation with Simcenter Flotherm BCI-ROMs
Mentor Graphics, a Siemens Business, is a world leader in electronic hardware and software design solutions, providing products, consulting services and award-winning support for the world’s most successful electronic, semiconductor and systems companies. We enable companies to develop better electronic products faster and more cost-effectively. Our innovative products help conquer complex design challenges. Mentor is technology leader in full chip emulation, Functional Verification, Design-for-Test and physical verification with its Veloce, Questa, Tessent and Calibre platforms.
Product: Siemens Simcenter FloTHERM
Version: 2019.1 Suite *
Supported Architectures: x64
Website Home Page : www.mentor.com
Language: english
System Requirements: PC **
Supported Operating Systems: **
Size: 1.8 Gb
* Release info FloTHERM 2019.1 build 19.20.2
FloTHERM PCB 2019.1 build 19.20.2
** System Requirements: Supported Configurations
This release has been validated as working on and supports the following operating system versions:
- Windows 10 Update Version 1809 (Pro and Enterprise editions).
- Windows 8 and 8.1 (Core, Pro and Enterprise editions)
- Windows 7 (Business, Enterprise and Ultimate editions)
- Windows Server 2012, Standard edition
- Windows Server 2012 R2, Standard Edition
- Windows Server 2016 Version 1607, Standard Edition
Release Highlights
OS Support changes:
Windows Server 2016 now supported.
Windows Server 2008 R2 is no longer supported
OS Roadmap Notes:
- Simcenter Flotherm software 2019.1 is the final release that will support Windows 8/8.1 and Windows Server 2012.
- The next release of Simcenter Flotherm will be the last that supports Windows 7.
Licensing Version;
Simcenter Flotherm 2019.1 requires updating FLEXnet license server to version v11.16.0.0 or higher
Flovolunteer GUI; The Flovolunteer GUI will be retired in the next release of Simcenter Flotherm.
Please visit my blog
Added by 3% of the overall size of the archive of information for the restoration
No mirrors please
× Siemens Simcenter FloTHERM 2019.1 Suite Close
Download File Size:1.78 GB